General Area Type Case Study:

Manufacturing Facilities

When combining both Lighting Upgrades and Sensors in a Manufacturing facility, savings potential is largely found on the manufacturing floor and in the open spaces. These areas are commonly overlooked during upgrades because of their high activity levels. At PES we focus on gathering the most overall savings and never overlook any area types. The following chart shows the area types, with both lighting and sensor upgrade savings potential:

Private Office

A common application representing 5-10% of the total building savings. Controls and lighting upgrades provide an improved working environment and convenience.

Open Office Space

Lighting upgrades improve the working environment, however an often overlooked application for controls, yet typically provides 15-25% of the building potential savings!

Meeting Rooms

An area type with fluctuating usage and often unoccupied with the lights left On. Popular application for Controls and Lighting providing 4-6% of the total building’s savings.

Hallways

With long run hours, Lighting upgrades are common. However, this is an ideal application for Controls providing, 10-15% of the building’s potential savings! Sensors add convenience and an element of security.

Storage

The infrequent use makes this an ideal application for Controls, providing 4-6% the buildings potential savings. A common retrofit of Incandescent to LED or Fluorescent and keeping the annual usage to a minimum with the sensors, means these lights will almost never need maintenance.

Restrooms

Sometimes a difficult application due to the partitioned stalls. Properly applied Microphonic technology sensors, however, resolve this issue, allowing for 2-7% of the building’s potentials savings. Additional savings can be obtained by controlling the exhaust fans as well.

Manufacturing Floor

A common misconception is that occupancy sensors cannot be installed to control lighting fixtures on a manufacturing floor when in fact this measure can provide energy saving anywhere from 30-50% depending on the production schedule. PES controls manufacturing floors considering not only the maximum energy savings but also safety and usuage.